SW350DM-W4C5 Four Sides Sander Machine for Woodworking Production
- The LINKYOU SW350DM-W4C5 Four Sides Sander Machine is designed for sanding long solid wood workpieces, moldings, door components, flooring strips, and furniture parts on multiple surfaces in one pass.
- It helps woodworking factories reduce repeated manual sanding, improve surface consistency, and prepare wood components for coating, assembly, or further processing
- Quick Answer
“What is for four sides sander machine?
A four sides sander machine is used to sand the upper, lower, left, and right surfaces of long wood workpieces in one pass. The LINKYOU SW350DM-W4C5 is designed for furniture parts, wood door components, flooring strips, mouldings, profiles, and solid wood parts that require consistent surface preparation.
- Mechanical Parameters
Mechanical Parameters of
SW350DM-W4C5
Technical buyers can review the main specifications of the SW350DM-W4C5 four sides sander machine, including working width, feeding thickness, feeding speed, motor configuration, total power, dimensions, and machine weight.
Item
Specification
Machine name
Four Sides Sander Machine
Equipment type
SW350DM-W4C5
Working width L1
50-350 mm
Maximum feeding thickness L2
120 mm
Minimum feeding length
400 mm
Feeding motor
380V, 50Hz, 1.1kW, 1400rpm
Feeding speed
5-15 m/min
Left and right side rollers
4 x 1.1kW, 380V, 50Hz, 1400rpm
Upper and lower rollers
5 x 1.5kW, 380V, 50Hz, 1400rpm
Total power
13kW
Dimension
3600 x 850 x 1900 mm
Weight
1500kg
Final machine specifications may vary according to the confirmed configuration. Please contact LINKYOU to confirm voltage, motor configuration, sanding unit setup, and production requirements before ordering.
What Is the SW350DM-W4C5
Four-Sides Sander Machine Used For?
The LINKYOU SW350DM-W4C5 four-sided sander machine is designed to sand the upper, lower, left, and right surfaces of long workpieces in a single continuous pass. It is commonly used for furniture components, wood door parts, flooring strips, decorative moldings, and solid wood profiles that require consistent surface preparation before coating, assembly, or finishing.
Furniture components
Wood door components
final assembly.
Flooring and Moldings
shaped profiles.
Solid wood profiles
- Machine Feature
Key Features of the SW350DM-W4C5
Four-Sides Sander Machine
Designed for stable feeding, flexible profile sanding, and multi-surface processing, the SW350DM-W4C5 helps manufacturers improve sanding consistency, reduce repeated handling, and adapt to a range of solid wood products.
Furniture
Components
Suitable for rails, stiles, frame parts, chair components, cabinet strips, and other long, solid wood parts. Multi-sided sanding improves surface consistency while reducing the need for repeated handling and manual sanding.
Flexible Brush Sanding
for Profiles
Flexible brush sanding belts conform to shaped, uneven, curved, and profiled wood surfaces, helping process edges, corners, grooves, and irregular areas more consistently.
Four-Sided Sanding
in One Pass
The upper, lower, left, and right surfaces can be processed in one continuous workflow, reducing repeated loading, manual turning, and material handling.
Quick Abrasive Replacement
The accessible sanding-unit design allows abrasives to be installed and replaced more conveniently, helping reduce maintenance time and production interruptions.
Variable-Speed
Sanding Control
Adjustable sanding speeds allow operators to match the machine settings to different wood species, workpiece profiles, abrasive grits, and surface-finish requirements.
L-Shaped and Profile Sanding Capability
The machine can be configured for L-shaped lines, decorative moldings, narrow strips, and profiled solid wood workpieces requiring sanding from multiple directions.
- Working Principle
How Does the SW350DM-W4C5
Four-Sides Sander Machine Work?
The SW350DM-W4C5 feeds long wood workpieces continuously through a series of sanding units. Pressing wheels stabilize the material; floating sanding units maintain contact with variations in thickness and profile; and the upper, lower, left, and right surfaces are processed in one pass. The finished workpiece is then discharged for coating, assembly, or further finishing.
-
Stable Workpiece
Feeding
The roller conveyor, chain-drive system, and individual pressing wheels guide long wood workpieces smoothly through the machine. The adjustable feeding speed helps match different materials, profiles, and sanding requirements.
-
Floating Contact
Adjustment
The floating sanding structure adapts to variations in workpiece thickness and profile. This helps maintain consistent abrasive contact while reducing excessive pressure on uneven or
shaped surfaces.
- Sequential Four-Sided Sanding
As the workpiece moves through the machine, the arranged sanding units process the upper, lower, left, and right surfaces. Flexible brush sanding belts reach flat areas, edges, grooves, corners, and profiled sections from multiple directions.
-
Continuous
Discharge
After the required surfaces have been sanded, the workpiece exits the machine continuously. It is then ready for inspection, coating, assembly, polishing, or the
next production process.
- Main Sanding Units and Components
What Sanding Units Are Used in the SW350DM-W4C5?
The SW350DM-W4C5 uses a combination of brush rollers, rotary sanding discs, horizontal sanding rollers, wide sanding belts, and polishing units. Each sanding unit performs a specific function, helping process flat surfaces, edges, corners, grooves, moldings, and profiled solid wood workpieces. The exact arrangement of sanding units depends on the selected machine configuration and processing requirements.
Brush Sanding
Roller
Brush sanding roller for sanding profiled wood surfaces on the SW350DM-W4C5
Rotary Disc Sanding Unit
Rotary disc sanding unit for uneven surfaces edges and corners
Multi-Angle Rotary Sanding Unit
Multi-angle rotary sanding unit for curved and profiled wood workpieces
Transverse Rotary Disc Unit
Transverse rotary disc sanding unit for multi-directional profile sanding
Dual-Station Horizontal Sanding
Dual-station horizontal sanding unit for continuous wood profile sanding
Oscillating Roller Sanding Unit
Oscillating roller sanding unit for uniform wood surface finishing
Wide Belt Sanding Unit
Wide belt sanding unit for flat and semi-flat wood surface preparation
Polishing Wheel
Unit
Polishing wheel unit for fine wood surface polishing and finishing
- Frequently Asked Questions
Frequently Asked Questions About the SW350DM-W4C5
Find quick answers about workpiece suitability, sanding configuration, abrasive selection, sample testing, and quotation requirements.
What is the SW350DM-W4C5 used for?
The SW350DM-W4C5 is designed for sanding the upper, lower, left, and right surfaces of long wood workpieces in one continuous pass. Typical applications include furniture components, wood door parts, flooring strips, moldings, and solid wood profiles.
What sizes of workpieces can this machine tool process?
Based on the current machine specification, the working width is 50–350 mm, the maximum feeding thickness is 120 mm, and the minimum feeding length is 400 mm. Final specifications should be confirmed before ordering.
How do I choose the right abrasive?
Abrasive selection depends on the wood species, workpiece profile, initial surface condition, required finish, abrasive grit, and sanding-unit configuration. LINKYOU can recommend a suitable combination after reviewing your samples or drawings.
Can sample materials be tested before ordering?
Yes. Sample sanding can help verify surface quality, abrasive selection, feeding speed, and machine configuration before the final equipment proposal is confirmed.
Can the sanding units be configured for different products?
The sanding-unit arrangement can be reviewed according to the workpiece shape, sanding direction, production capacity, and finish requirements. Please provide product photos, dimensions, or profile drawings for evaluation.
What information is required for a quotation?
Please provide the material type, workpiece width, thickness and length, profile drawing or photo, required surface finish, target production capacity, and current processing method.
- REQUEST A MACHINE CONFIGURATION
Need a Four-Sides Sander for Your Wood Products?
Send us your workpiece material, dimensions, profile drawing, sanding requirement, and target capacity. Our team will review whether the SW350DM-W4C5 or another sanding configuration is more suitable for your production.
- Workpiece and profile review
- Sanding-unit configuration advice
- Machine quotation and technical proposal